In-mold labels Market By Technology (Injection Molding, Extrusion, Thermoforming), by Material (PP, PE, ABS, PVC, Others), by Printing Technology (Flexographic, Offset, Gravure), by Printing inks, by End Use (Food & Beverage, Consumer Durables, Automotive) & By Region - Forecast to 2031

Description

Description

 

The market for in-mold labels is projected to grow from USD XX  Billion in 2031  to reach USD XX Billion by 2031 , at a CAGR of XX%. The report aims at estimating the market size and future growth potential of the in-mold labels market across different segments such as material, technology, end use, printing technologies, printing inks, and region. Globally, competition in the in-mold labels market is growing considerably owing to the improvement in labeling technologies such as 3D printing and thermoforming. Label convertors are keen on developing innovative labeling solutions that can withstand harsh weather conditions such as extreme temperature and abrasion. The base year considered for the study is 2020 and the market size is projected from 2021 to 2031.

 

The research methodology used to estimate and forecast the market size included the top-down approach. The total market size of the in-mold labels was calculated, and accordingly, the percentage was allotted to different sectors in each of the segments. This allotment and calculation was done on the basis of extensive primary interviews and secondary research. Primary research involved in this report includes extensive interviews with key people such as CEOs, VPs, directors, and executives. After arriving at the overall market size, the total market was split into several segments and sub segments. These data triangulation and market breakdown procedures were employed to complete the overall market engineering process and arrive at the exact statistics for all segments and sub segments. The breakdown of profiles of primary respondents is depicted in the figure below.

 

The in-mold labels ecosystem comprises in-mold labels manufacturers and vendors such as CCL Industries Inc. (Canada), Constantia Flexibles Group GmbH (Austria), Huhtamaki Group (Finland), Coveris Holding S.A. (U.S.), Cenveo, Inc. (U.S.), and government and national associations such as IMDA, which helps the manufacturers in the development and growth of in-mold label products, technologies and markets.

 

Target Audience

 

  • In-mold label manufacturers
  • Government and research organizations
  • National and local government organizations
  • Institutional investors
  • In-Mold Decorating Association (IMDA)

 

Scope of the Report

 

The research report segments in-mold labels into the following submarkets:

 

By Material:

 

  • Polypropylene
  • Polyethylene
  • Polyvinyl chloride
  • ABS resins
  • Others (polyethylene terephthalate, polyvinylidene chloride (PVdC), polycarbonate, and synthetic papers)

 

By Technology:

 

  • Extrusion blow-molding process
  • Injection molding process
  • Thermoforming

 

By End Use:

 

  • Personal care
  • Consumer durables
  • Food & beverage
  • Automotive
  • Others (medical and laboratory, paints, etc.)

 

By Printing Technologies

 

  • Flexographic printing
  • Offset printing
  • Gravure printing
  • Digital printing
  • Others (screen printing and letterpress methods)

 

By Printing Inks

 

  • UV curable inks
  • Thermal cured inks
  • Water-soluble inks
  • Others (high melt-resistant inks)

 

By Region:

 

  • North America
  • Europe
  • Asia-Pacific
  • RoW

 

Product Analysis

 

  • Product matrix which gives a detailed comparison of the market for different recycled product types

 

Geographic Analysis

 

  • Further analysis of in-mold labels market for additional countries

Company Information

 

  • Detailed analysis and profiling of additional market players (up to 5).

MarketsandMarkets projects that the market for in-mold labels is projected to grow from USD 2.58 Billion in 2021 to USD 3.23 Billion by 2031, at a CAGR of 4.54%. The market for in-mold labels is growing due to innovative developments in the industrial sectors, growth in the food & beverage industry, and rising demand for eco-friendly and high-performing labels. Increasing awareness among consumers about the sustainable labels and their pace of adopting products is one of the biggest factors that led to the increase in the demand of in-mold labels, especially in the emerging Asia-Pacific and Latin American regions.

 

The in-mold labels market is segmented on the basis of material, technology, end use, printing technologies, printing inks, and region. On the basis of material, polypropylene (PP) held the largest market share, in terms of both volume and value. It has become an essential labeling material because of its effective moisture-resistant properties. It is used in in-mold labeling of various consumer and industrial products such as foods, bar code labels, and retail labels.

 

Injection molding technology was the most widely used in-mold labels manufacturing process among other technologies, in terms of both volume and value. The majority of in-mold labels are used in injection molding applications as they help in providing a three-dimensional effect to the labels on various products such as food & beverages, cosmetics, and automotive parts.

 

Based on printing technologies, flexographic printing held the largest market share. This printing technology allows printing on a wide variety of both porous and nonporous surfaces making it easier to mold various kinds of polymers. On the basis of printing inks, UV curable inks held the largest market share, in terms of both volume and value. The reason for this dominance is its chemical- and abrasion-resistant properties as the in-mold labelling process is carried out under high temperatures.

 

On the basis of end use, the market is segmented into personal care, consumer durables, food & beverage, and automotive. The food & beverage segment accounted for the largest market share in 2020. This growth is attributed to the increasing consumer awareness about the trends related to packaged food and the rising consumption of containers and bottled packaging.

 

On the basis of key regions, the market for in-mold labels is segmented into North America, Europe, Asia-Pacific, and the Rest of the World (RoW). North America is projected to grow at the highest rate from 2021 to 2031, due to presence of key players in the market and the changing government policies about sustainable labels which has impacted the performance of the in-mold labels market.

 

Mergers & acquisitions was the major strategy adopted by most players in the market. Companies such as CCL Industries Inc. (Canada), Constantia Flexibles Group GmbH (Austria), Huhtamaki Group (Finland), Coveris Holding S.A. (U.S.), Cenveo, Inc. (U.S.), Fuji Seal International, Inc. (Japan), and Multicolor Corporation (U.S.) were the key players who adopted this strategy to increase their geographic reach and product offerings, to increase the customer base, and to stay ahead of competitors. Companies aim to serve the market efficiently by investing in research & development activities and introducing new products to keep up with changing consumer wants and needs.

 

There are certain factors prevailing in the market that hinder the growth of this industry. Lack of awareness about various types of labeling techniques factors in decreasing the demand for this type of labels. Varying environmental mandates in terms of printing on labels across different regions, and increasing cost of raw materials are significant challenges faced by manufacturers in this market.

 

Covered Key Topics

Growth Opportunities Market Growth Drivers
Leading Market Players Company Market Share
Market Size and Growth Rate Market Trend and Technological

TOC

Table of Contents

 

1 Introduction

    1.1 Objectives of the Study

    1.2 Market Definition

    1.3 Study Scope

           1.3.1 Periodization Considered for This Study

    1.4 Currency Considered for This Study

    1.5 Units Considered for This Study

    1.6 Stakeholders

 

2 Research Methodology

    2.1 Research Data

           2.1.1 Secondary Data

                    2.1.1.1 Key Data From Secondary Sources

           2.1.2 Primary Data

                    2.1.2.1 Key Data From Primary Sources

                    2.1.2.2 Breakdown of Primary Interviews

    2.2 Factor Analysis

           2.2.1 Introduction

           2.2.2 Demand-Side Analysis

                    2.2.2.1 Economic Factors

                    2.2.2.2 Growth in Packaging Market

                    2.2.2.3 Growth in the Manufacturing Sector

           2.2.3 Supply-Side Analysis

                    2.2.3.1 Industry Regulations

                    2.2.3.2 Technology and Science

    2.3 Market Size Estimation

    2.4 Market Breakdown & Data Triangulation

    2.5 Research Assumptions & Limitations

           2.5.1 Assumptions

           2.5.2 Limitations

 

3 Executive Summary

    3.1 Introduction

           3.1.1 Factors Driving the In-Mold Labels Market

    3.2 Evolution of In-Mold Labels

    3.3 In-Mold Labels Market Size, By Material, 2021 vs 2031 (USD Million)

    3.4 Market Size, By Region, 2021 vs 2031 (USD Million)

    3.5 Country-Wise Growth Rates From 2021 to 2031

    3.6 Strategies Adopted By Leading Market Players From 2011 to 2021

 

4 Premium Insights

    4.1 Attractive Market Opportunities in the In-Mold Labels Market

    4.2 End Use of In-Mold Labels

    4.3 In-Mold Labels Market in the Asia-Pacific Region, 2021

    4.4 Country Wise Growth Rates From 2021 to 2031

    4.5 Region Wise Market Share in 2020

    4.6 Emerging Markets vs Developed Markets

    4.7 Printing Inks Used for In-Mold Labeling

    4.8 In-Mold Labels Market Life Cycle Analysis, By Region

 

5 Market Overview

    5.1 Introduction

    5.2 Evolution of In-Mold Labels Market

    5.3 Market Segmentation

    5.4 Market Dynamics

           5.4.1 Drivers

                    5.4.1.1 Increasing Demand for Packaged Foods & Beverages

                    5.4.1.2 Increasing Demand for Labels Providing Efficient Brand Recognition to Product

                    5.4.1.3 Growing Demand for Environment-Friendly Labels

                    5.4.1.4 Companies Opting for In-Mold Labeling Due to Increased Manufacturing Efficiencies

           5.4.2 Restraints

                    5.4.2.1 Recent Increase in Prices of Raw Materials

                    5.4.2.2 Increasing Use of Printed Label Description Labeling

           5.4.3 Opportunities

                    5.4.3.1 Increasing Demand From France and Germany

           5.4.4 Challenges

                    5.4.4.1 Balancing Performance to Cost

                    5.4.4.2 Varying Environmental Mandates Across Regions

                    5.4.4.3 Designing Customer-Specific Labels

                    5.4.4.4 Difficulty in Managing Supply Chain

 

6 Industry Trends

    6.1 Introduction

    6.2 Value Chain

    6.3 Porter’s Five Forces Analysis

           6.3.1 Threat of New Entrants

           6.3.2 Threats of Substitutes

           6.3.3 Bargaining Power of Suppliers

           6.3.4 Bargaining Power of Buyers

           6.3.5 Intensity of Competitive Rivalry

    6.4 Average Price Analysis

           6.4.1 In-Mold Labels Market, Average Price Analysis, By Region

           6.4.2 Market, Average Price Analysis, By Technology

           6.4.3 Market, Average Price Analysis, By End Use

           6.4.4 Market, Average Price Analysis, By Material

 

7 In-Mold Labels Market, By Technology

    7.1 Introduction

           7.1.1 In-Mold Labels Market, By Technology

                    7.1.1.1 Injection Molding Process Dominated the In-Mold Labels Market, By Technology, in 2020

    7.2 Extrusion Blow-Molding Process

           7.2.1 Extrusion Blow-Molding Process Market, By End Use

                    7.2.1.1 Food & Beverage Dominated the Extrusion Blow-Molding Process Market, By End Use, in 2020

           7.2.2 Extrusion Blow-Molding Process Market, By Material

                    7.2.2.1 PE Dominated the Extrusion Blow-Molding Process Market, By Material, in 2020

           7.2.3 Extrusion Blow-Molding Process Market, By Printing Technology

                    7.2.3.1 Flexographic Printing Dominated the Extrusion Blow-Molding Process Market, By Printing Technology, in 2020

    7.3 Injection Molding Process

           7.3.1 Injection Molding Process Market, By End Use

                    7.3.1.1 Food & Beverage Dominated the Injection Molding Process Market, By End Use, in 2020

           7.3.2 Injection Molding Process Market, By Material

                    7.3.2.1 PP Dominated the Injection Molding Process Market, By Material, in 2020

           7.3.3 Injection Molding Process Market, By Printing Technology

                    7.3.3.1 Flexographic Printing Dominated the Injection Molding Process Market, By Printing Technology, in 2020

    7.4 Thermoforming

           7.4.1 Thermoforming Process Market, By End Use

                    7.4.1.1 Food & Beverage Dominated the Thermoforming Process Market, By End Use, in 2020

           7.4.2 Thermoforming Process Market, By Material

                    7.4.2.1 PP Dominated the Thermoforming Process Market, By Material, in 2020

           7.4.3 Thermoforming Process Market, By Printing Technology

                    7.4.3.1 Flexographic Printing Dominated the Thermoforming Process Market, By Printing Technology, in 2020

 

8 In-Mold Labels Market, By Material

    8.1 Introduction

           8.1.1 In-Mold Labels Market Size, By Material

                    8.1.1.1 Polypropylene Dominated the In-Mold Labels Market, By Material, in 2020

    8.2 Polypropylene (PP)

           8.2.1 Polypropylene Market, By Technology

                    8.2.1.1 Injection Molding Technology Dominated the Polypropylene Market, By Material, in 2020

           8.2.2 Polypropylene Market, By End Use

                    8.2.2.1 Food & Beverage Dominated the Polypropylene Market, By End Use, in 2020

    8.3 Polyethylene (PE)

           8.3.1 Polyethylene Market, By Technology

                    8.3.1.1 Injection Molding Technology Dominated the Polyethylene Market, By Material, in 2020

           8.3.2 Polyethylene Market, By End Use

                    8.3.2.1 Food & Beverage Dominated the Polyethylene Market, By End Use, in 2020

    8.4 ABS Resins

           8.4.1 ABS Resins Market, By Technology

                    8.4.1.1 Injection Molding Technology Dominated the ABS Resins Market, By Material, in 2020

           8.4.2 ABS Resins Market, By End Use

                    8.4.2.1 Food & Beverage Dominated the ABS Resins Market, By End Use, in 2020

    8.5 Polyvinyl Chloride (PVC)

           8.5.1 Polyvinyl Chloride Market, By Technology

                    8.5.1.1 Injection Molding Technology Dominated the Polyvinyl Chloride Market, By Material, in 2020

           8.5.2 Polyvinyl Chloride Market, By End Use

                    8.5.2.1 Food & Beverage Dominated the Polyvinyl Chloride Market, By End Use, in 2020

    8.6 Other Co-Polymers

           8.6.1 Other Co-Polymers Market, By Technology

                    8.6.1.1 Injection Molding Technology Dominated the Other Co-Polymers Market, By Material, in 2020

           8.6.2 Other Co-Polymers Market, By End Use

                    8.6.2.1 Food & Beverage Dominated the Other Co-Polymers Market, By End Use, in 2020

 

9 In-Mold Labels Market, By End Use

    9.1 Introduction

           9.1.1 In-Mold Labels Market Size, By End-Use

                    9.1.1.1 Food & Beverage Segment Dominated the In-Mold Labels Market in 2020

    9.2 Personal Care

    9.3 Automotive

    9.4 Food & Beverage

    9.5 Consumer Durables

    9.6 Others

 

10 In-Mold Labels Market, By Printing Technology

     10.1 Introduction

             10.1.1 In-Mold Labels Market, By Printing Technology

                        10.1.1.1 Flexographic Printing Method Dominated the In-Mold Labels Market in 2020

     10.2 Flexographic Printing

     10.3 Offset Printing

     10.4 Gravure Printing

     10.5 Digital Printing

     10.6 Others

 

11 In-Mold Labels Market, By Printing Ink

     11.1 Introduction

             11.1.1 In-Mold Labels Market, By Printing Ink

                        11.1.1.1 UV Curable Inks Dominated the In-Mold Labels Market in 2020

     11.2 UV Curable Inks

     11.3 Water Soluble Inks

     11.4 Thermal-Cure Inks

     11.5 Others

 

12 In-Mold Labels Market, By Region

     12.1 Introduction

             12.1.1 In-Mold Labels Market Size, By Region

                        12.1.1.1 Europe Dominated the Market for In-Mold Labels in 2020

     12.2 Europe

             12.2.1 Europe: In-Mold Labels Market Size, By Country

                        12.2.1.1 Germany Accounted for the Largest Share in the European In-Mold Labels Market

             12.2.2 Europe: Market Size, By Technology

                        12.2.2.1 Extrusion Blow-Molding Segment to Grow at the Highest CAGR Through 2031

             12.2.3 Europe: Market Size, By Material

                        12.2.3.1 PP Segment Accounted for the Largest Share in European In-Mold Labels Market, in 2020

             12.2.4 Europe: Market Size, By End Use

                        12.2.4.1 Food & Beverage Segment Dominated the Market in Europe in 2020

             12.2.5 Germany

                        12.2.5.1 Germany: Market Size, By Technology

                                     12.2.5.1.1 Injection Molding Process Accounted for the Largest Market Share in 2020

                        12.2.5.2 Germany: Market Size, By Material

                                     12.2.5.2.1 PP Segment Accounted for the Largest Market Share in 2020

                        12.2.5.3 Germany: Market Size, By End Use

                                     12.2.5.3.1 Personal Care Was the Second-Largest Segment in 2020 in Germany

             12.2.6 U.K.

                        12.2.6.1 U.K.: In-Mold Labels Market Size, By Technology

                                     12.2.6.1.1 Extrusion Blow-Molding Process is Projected to Grow at the Highest Rate Through 2031

                        12.2.6.2 U.K.: Market Size, By Material

                                     12.2.6.2.1 PE Segment to Grow at the Second-Highest Rate By 2031 in the U.K.

                        12.2.6.3 U.K.: Market Size, By End Use

                                     12.2.6.3.1 Food & Beverage Segment Dominated the U.K. Market for In-Mold Labels

             12.2.7 Russia

                        12.2.7.1 Russia: Market Size, By Technology

                                     12.2.7.1.1 Injection Molding Technology Dominated the Market for In-Mold Labels in 2020

                        12.2.7.2 Russia: Market Size, By Material

                                     12.2.7.2.1 PE Was the Second-Most Consumed Material in Russia in 2020

                        12.2.7.3 Russia: Market Size, By End Use

                                     12.2.7.3.1 Personal Care Segment to Grow at A Potential Rate By 2031

             12.2.8 France

                        12.2.8.1 France: In-Mold Labels Market Size, By Technology

                                     12.2.8.1.1 Extrusion Blow-Molding Process is Projected to Grow at the Highest Rate By 2031

                        12.2.8.2 France: In-Mold Labels Market Size, By Material

                                     12.2.8.2.1 PP Accounted for the Largest Market Share in 2020

                        12.2.8.3 France: Market Size, By End Use

                                     12.2.8.3.1 Food & Beverage Segment Dominated the In-Mold Labels Market in France

             12.2.9 Rest of Europe

                        12.2.9.1 Rest of Europe: In-Mold Labels Market Size, By Technology

                                     12.2.9.1.1 Extrusion Blow-Molding Process to Grow at the Highest CAGR Through 2031

                        12.2.9.2 Rest of Europe: Market Size, By Material

                                     12.2.9.2.1 PE Segment to Grow at the Second-Highest Rate Through 2031

                        12.2.9.3 Rest of Europe: Market Size, By End Use

                                     12.2.9.3.1 Food & Beverage Segment Accounted for the Largest Share in 2020

     12.3 Asia-Pacific

             12.3.1 Asia-Pacific: In-Mold Labels Market Size, By Country

                        12.3.1.1 China Dominated the Asia-Pacific In-Mold Labels Industry in 2020

             12.3.2 Asia-Pacific: Market Size, By Technology

                        12.3.2.1 Injection Molding Process Accounted for the Largest Market Share in 2020

             12.3.3 Asia-Pacific: Market Size, By Material

                        12.3.3.1 PP (Polypropylene) Segment to Grow at the Highest CAGR From 2021 to 2031

             12.3.4 Asia-Pacific: Market Size, By End Use

                        12.3.4.1 Food & Beverage Segment to Grow at the Highest Rate From 2021 to 2031

             12.3.5 China

                        12.3.5.1 China: In-Mold Labels Market Size, By Technology

                                     12.3.5.1.1 Injection Molding Process Accounted for the Largest Market Share in China in 2020

                        12.3.5.2 China: Market Size, By Material

                                     12.3.5.2.1 Polypropylene Segment Dominated the Chinese Market in 2020

                        12.3.5.3 China: Market Size, By End Use

                                     12.3.5.3.1 Personal Care Segment is Projected to Dominate the In-Mold Labels Market in China By 2031

             12.3.6 Japan

                        12.3.6.1 Japan: In-Mold Labels Market Size, By Technology

                                     12.3.6.1.1 Extrusion Blow-Molding Process Segment to Grow at the Highest CAGR Through 2031

                        12.3.6.2 Japan: Market Size, By Material

                                     12.3.6.2.1 PP Segment is Projected to Grow at the Highest Rate From 2021 to 2031

                        12.3.6.3 Japan: Market Size, By End Use

                                     12.3.6.3.1 Application of In-Mold Labels in Food& Beverage Sector Was the Highest in 2020

             12.3.7 India

                        12.3.7.1 India: Market Size, By Technology

                                     12.3.7.1.1 Extrusion Blow-Molding Process Projected to Grow at the Highest Rate From 2021 to 2031

                        12.3.7.2 India: Market Size, By Material

                                     12.3.7.2.1 Polypropylene (PP) Segment Accounted for Largest Share in the Indian In-Mold Labels Market in 2020

                        12.3.7.3 India: Market Size, By End Use

                                     12.3.7.3.1 Food & Beverage Packaging in India is Largely Driven By Growth in the Packaging Industry

             12.3.8 Australia

                        12.3.8.1 Australia: Market Size, By Technology

                                     12.3.8.1.1 Injection Molding Process to Grow at the Second-Highest CAGR By 2031

                        12.3.8.2 Australia: Market Size, By Material

                                     12.3.8.2.1 PP Segment Accounted for Largest Market Share in 2020

                        12.3.8.3 Australia: Market Size, By End Use

                                     12.3.8.3.1 Personal Care Segment Projected to Have A Potential Growth By 2031

             12.3.9 Rest of Asia-Pacific

                        12.3.9.1 Rest of Asia-Pacific: Market Size, By Technology

                                     12.3.9.1.1 Injection Molding Process Held the Largest Share in the Rest of Asia-Pacific

                        12.3.9.2 Rest of Asia-Pacific: Market Size, By Material

                                     12.3.9.2.1 PE Was the Second-Largest Segment in 2020

                        12.3.9.3 Rest of Asia-Pacific: Market Size, By End Use

                                     12.3.9.3.1 Personal Care Was the Second-Largest Industry for In-Mold Labels in 2020

     12.4 North America

             12.4.1 North America: In-Mold Labels Market Size, By Country

                        12.4.1.1 the U.S. is Projected to Be the Fastest-Growing Market By 2031

             12.4.2 North America: Market Size, By Technology

                        12.4.2.1 Injection Molding Process to Grow at the Highest Rate By 2031

             12.4.3 North America: Market Size, By Material

                        12.4.3.1 Polypropylene (PP) is Projected to Grow at the Highest Rate By 2031

             12.4.4 North America: Market Size, By End Use

                        12.4.4.1 Food & Beverage Segment Dominated the End Use Market in North America

             12.4.5 U.S.

                        12.4.5.1 U.S.: In-Mold Labels Market Size, By Technology

                                     12.4.5.1.1 Extrusion Blow-Molding Process Dominated the U.S. Market in 2020

                        12.4.5.2 U.S.: Market Size, By Material

                                     12.4.5.2.1 PP is Projected to Grow at the Highest Rate By 2031

                        12.4.5.3 U.S.: Market Size, By End Use

                                     12.4.5.3.1 Food & Beverage Segment Dominated the Market in U.S. in 2020

             12.4.6 Canada

                        12.4.6.1 Canada: In-Mold Labels Market Size, By Technology

                                     12.4.6.1.1 Extrusion Blow-Molding Process Was the Most Widely Used Technology in 2020

                        12.4.6.2 Canada: Market Size, By Material

                                     12.4.6.2.1 PE to Grow at the Second-Highest Rate in the Canadian Market

                        12.4.6.3 Canada: Market Size, By End Use

                                     12.4.6.3.1 Personal Care Segment to Grow at the Second-Highest Rate By 2031

             12.4.7 Mexico

                        12.4.7.1 Mexico: In-Mold Labels Market Size, By Technology

                                     12.4.7.1.1 Injection Molding Process is Projected to Dominate the Market By 2031

                        12.4.7.2 Mexico: Market Size, By Material

                                     12.4.7.2.1 PP to Grow at the Highest Rate in the Mexican Market

                        12.4.7.3 Mexico: Market Size, By End Use

                                     12.4.7.3.1 Food & Beverage Segment to Grow at the Highest Rate By 2031

     12.5 Rest of the World (RoW)

             12.5.1 RoW: In-Mold Labels Market Size, By Country

                        12.5.1.1 Brazil Dominated the RoW In-Mold Labels Market in 2020

             12.5.2 RoW: Market Size, By Technology

                        12.5.2.1 Injection-Molding Process to Grow at the Second-Highest Rate By 2031

             12.5.3 RoW: Market Size, By Material

                        12.5.3.1 ABS Resins are Projected to Grow at the Second-Highest Rate By 2031

             12.5.4 RoW: Market Size, By End Use

                        12.5.4.1 Food & Beverage Segment Dominated the RoW Market in 2020

             12.5.5 Brazil

                        12.5.5.1 Brazil: In-Mold Labels Market Size, By Technology

                                     12.5.5.1.1 In-Mold Labels Market in Brazil Was Dominated By Injection Molding Process in 2020

                        12.5.5.2 Brazil: Market Size, By Material

                                     12.5.5.2.1 PP is Projected to Grow at the Highest CAGR By 2031

                        12.5.5.3 Brazil: Market Size, By End Use

                                     12.5.5.3.1 Food & Beverage Segment Dominated the Brazilian Market for In-Mold Labels in 2020

             12.5.6 South Africa

                        12.5.6.1 South Africa: In-Mold Labels Market Size, By Technology

                                     12.5.6.1.1 Extrusion Blow-Molding Process Projected to Dominate the Market in South Africa By 2031

                        12.5.6.2 South Africa: Market Size, By Material

                                     12.5.6.2.1 Polypropylene Segment Dominated the South African Market in 2020

                        12.5.6.3 South Africa: Market Size, By End Use

                                     12.5.6.3.1 Personal Care Segment is Expected to Have Potential Growth Opportunities By 2031

             12.5.7 Other Countries in RoW

                        12.5.7.1 Other Countries in RoW: In-Mold Labels Market Size, By Technology

                                     12.5.7.1.1 Injection Molding Process Segment Projected to Grow at the Highest Rate By 2031

                        12.5.7.2 Other Countries in RoW: Market Size, By Material

                                     12.5.7.2.1 Polyethylene (PE) Segment Accounted for the Largest Market Share in 2020

                        12.5.7.3 Other Countries in RoW: Market Size, By End Use

                                     12.5.7.3.1 Personal Care Segment is Projected to Grow at the Second-Highest CAGR By 2031

 

13 Competitive Landscape

     13.1 Overview

     13.2 Competitive Situations & Trends

     13.3 Key Growth Strategies, 2011–2021

             13.3.1 Mergers & Acquisitions

             13.3.2 Agreements, Collaborations & Joint Ventures

             13.3.3 Expansions & Investments

             13.3.4 New Product Launches

 

14 Company Profiles

     14.1 Introduction

     14.2 CCL Industries, Inc.

     14.3 Constantia Flexibles Group GmbH

     14.4 Huhtamaki Group

     14.5 Coveris Holdings S.A.

     14.6 Cenveo Inc.

     14.7 Fuji Seal International, Inc.

     14.8 Multicolor Corporation

     14.9 EVCO Plastics

     14.10 Innovia Films Ltd.

     14.11 Inland Label and Marketing Services, LLC

 

15 Appendix

     15.1 Insights of Industry Experts

     15.2 Discussion Guide

     15.3 Company Developments

             15.3.1 Mergers & Acquisitions

     15.4 Introducing RT: Real-Time Market Intelligence

     15.5 Available Customizations

     15.6 Related Reports

 

Request Tables & Figures


*Name
*Corporate Email ID
*Contact Number
Company Name
Job Title
Select Country
How can we help you?

*Please verify captcha


Companies:

Our Clients